Full Custom Turner +2 Bullet Mic
Hot and Very Gritty
High-Impedance Harmonica Microphone
Vintage 1970’s Shure Controlled Magnetic
Fully Tested and Working
Minor Imperfection on shell top, See Photos!
A chopped, milled, and honey pearl powder coated bullet mic head from a classic Turner desk microphone. It’s been beheaded, and milled to remove the center mohawk rib on the top. This makes the mic a nice small diameter, easy-to-hold, and stage-ready.
I’ve added a Switchcraft 5/8” screw-on connector and volume control for on-stage flexibility. This shell is light, and has a nice chrome grille case and Turner badge. Additionally it has a vintage slotted volume control knob for good looks. The element is set in a new custom gasket.
Tone-wise, this mic is hot and gritty. It’s got great controlled bass distortion when cupped, and clear, crisp tone when open. This CM element sound is what’s important, and it has excellent sound!
The mic features:
– Strong 1972 Shure 99B86 element
– All new Powder Coat
– Premium Volume Control Knob
– Switchcraft 5/8” screw-on connector
– 1020 Ohms, Strong element
– All new wiring
Good cosmetic condition, but a few imperfections in the Powder Coat and along the top where the fin was removed. Look at all the photographs please.
Out of stock
|Dimensions||3 × 3 × 3 in|